Mr. Backtester

Guide

How to use Mr. Backtester charts

What every box, table and layer on the charts page shows, and how to load your own MetaTrader or TradingView data, step by step.

1. Reading the charts

Inside-candle boxes

The boxes at the top each show one candle of a higher timeframe — month, week, day, 4 hours, 1 hour, 15 minutes and 5 minutes — with the candles of the next lower timeframe drawn inside it. You can see at a glance how the day was built from its 4-hour candles, how the 4-hour candle was built from its hourly candles, and so on.

A 4H box: the dashed area is the 4H candle's body, with three finished 1H candles inside it and one empty slot HCOL 1 2 3 4
A 4H box during its fourth hour.
  1. The dashed area is the 4H candle's body, from its open (O) to where it is now (C). Green when price is above the open, red when below.
  2. Each small candle is one 1H candle inside it. Three hours are done.
  3. The empty slot is an hour that has not happened yet.
  4. H and L are the 4H candle's high and low so far.

Trend panel

Each chart has a small panel in its corner that reads the trend of that chart, the same way as our MetaTrader indicator.

Multi-timeframe structure table

This table looks at market structure on the daily, 4-hour, 1-hour and 15-minute charts: whether price has been breaking swing highs (bullish) or swing lows (bearish), and how strong that is on a scale of 0–4. The bias is the direction most of these timeframes agree on.

The confluence score (0–5) counts how many of these agree with the bias: the nearest unfilled fair value gap, the structure of the timeframe you choose (1H, 15M or 5M), price against the weekly pivot, price against the monthly pivot, and the daily structure. A high score means the pieces line up. It describes the market; it is not a signal to trade.

Today's market scan

The scan checks about 45 crypto and metal pairs every 15 minutes on D, 4H, 1H and 15M, using the same reading as the trend panel:

▲ Trend ▼ Trend ADX 20+ with the signals agreeing   Range ADX under 20   Tight a range with unusually narrow Bollinger bands   Mixed strong but undecided

Pairs are grouped into Trending up (3 or more of the 4 timeframes up, none down), Trending down, Consolidating and Mixed. Tap a pair to open it.

Chart layers

Each chart has a Layers button in its lower-left corner. Every chart remembers its own layers, and Apply to all charts copies them to the others. Only FVG zones and pivots start switched on, so the charts stay clean.

FVG zones

Fair value gaps that price has not filled yet. Each chart shows its own timeframe; the structure table's settings can switch every chart to one fixed timeframe.

Order blocks

When a swing high is broken, the lowest candle before the break becomes a bullish order block, and the reverse for bearish. Removed once price closes through it.

Volume profile

Where the most volume traded: point of control (POC) and value area (VAH, VAL). Choose the visible range or a fixed period — previous day, today, previous week, this week or your own dates.

Pivots

Weekly and monthly pivot levels, with R1–R3 and S1–S3 if you want them.

VWAP

Volume-weighted average price from the start of the day, week or month, with ±1σ and ±2σ bands.

Delta + CVD

Buying minus selling volume for each candle, and its running total. Needs Binance live data.

Drawing tools

Open Draw above the charts for horizontal and vertical lines, trend lines, rectangles, a volume profile for any period you drag across (drag past the last candle to keep it running to now), and Swing points: click each high and low and the points are labelled HH, HL, LH and LL for you. Click the last point again or press Enter to finish. Drawings are saved in your browser for each pair.

2. Load your own data

The charts open with live prices from Binance. To see your broker's prices — forex, gold, indices or anything else — export candles from your platform and load the file with the Your data button on the charts page. The file is read on your device and is never uploaded.

Use 1-minute (M1) data if you can. A file fills its own timeframe and every timeframe above it. With M1 data every box and chart works; with H1 data the 15M, 5M and smaller views stay empty.

From MetaTrader 5

  1. View
  2. Symbols
  3. Bars
  4. Request
  5. Export Bars
  1. In MetaTrader 5, open View → Symbols (or press Ctrl+U) and go to the Bars tab.
  2. Choose the symbol, the timeframe M1, and a date range — a few weeks to a few months is plenty. Click Request and wait until the bars appear.
  3. Click Export Bars and save the file.
  4. On the charts page, click Your data, choose the file, give it a name such as XAUUSD, keep the time zone on Broker server time and click Show on charts.

If fewer bars arrive than you asked for, raise Tools → Options → Charts → Max bars in chart and request again.

From MetaTrader 4

  1. Tools
  2. History Center
  3. 1 Minute (M1)
  4. Export
  1. Open Tools → History Center (or press F2).
  2. Open your symbol in the list and double-click 1 Minute (M1).
  3. Click Export and save the file as CSV.
  4. Load it with Your data and keep the time zone on Broker server time.

From TradingView

  1. Layout menu
  2. Export chart data…
  3. ISO time
  4. Export
  1. Open the chart with the symbol you want and switch it to the 1-minute timeframe. TradingView exports the bars that are loaded on the chart, so scroll left to load more history first.
  2. Open the layout menu at the top right of the chart (the arrow next to your layout's name) and choose Export chart data… (called Download chart data in some versions).
  3. Choose ISO time as the time format and click Export.
  4. Load the file with Your data. Choose the time zone whose midnight should open your daily candles — Broker server time to match MetaTrader, or UTC.

Exporting chart data is not available on every TradingView plan. If you cannot find the option, check your plan's features on TradingView.

Any other CSV file

Any file with a date, an optional time, and open, high, low and close columns works, with or without a header row and separated by commas, semicolons or tabs. A volume column is used if there is one. For example:

Date,Time,Open,High,Low,Close,Volume
2026.10.20,09:00,2630.15,2631.40,2629.80,2631.05,412

3. Choose the right time zone

The time zone tells the charts which clock the times in your file use. It also decides when daily, weekly and monthly candles open.

Times on the charts are always shown in your own local time.

4. Why we recommend MT5

TradingView is a good source too, but exported data comes from TradingView's feed, which can differ from your broker's, exporting depends on your plan, and there is no way to bring its prices in live.

5. If something looks wrong

“Could not find the date, open, high, low and close columns”

Open the file in a text editor and check that the first line names the columns, or that each line starts with the date followed by open, high, low and close. Files saved from Excel sometimes change the separator or the date format; export again from your platform instead.

The candles are shifted by a few hours

The time zone does not match the file. MetaTrader files need Broker server time (or your broker's own clock); try UTC for files from other sources.

The daily candle is different from my platform

Daily candles open at midnight of the time zone you chose. Pick the same clock your platform uses — Broker server time for most MetaTrader brokers.

Some boxes and charts are empty

Your file's timeframe is larger than those views. A 1-hour file cannot fill the 15-minute and 5-minute views. Export M1 data to fill everything.

The file takes a long time to load

A year of M1 data is around 370,000 lines and takes a few seconds. Files larger than 150 MB are not accepted; export a shorter date range.

Still stuck? Write to contact@mrbacktester.com and attach the first few lines of your file.